Arlington, Texas 76012
Terms & Conditions
General.    These Terms and Conditions of Sale ("Terms") apply to any order from or sale to a customer of Fast-Spec (any such customer as well as any applicant for credit with Fast-Spec may be referred to as a "Customer") and are part of any application for credit with Fast-Spec. These Terms also apply to any proposal, estimate or quote that Fast-Spec makes. These Terms may not be changed or superseded by any different or additional terms and conditions contained in any Customer purchase order, acknowledgement, form or other document. Fast-Spec hereby objects to and rejects any such additional or different terms and conditions. Additional or different terms shall only apply if an officer of Fast-Spec (Vice President or higher only) approves the additional or different terms in a signed writing expressing the officer's intent to bind Fast-Spec to the additional or different terms and conditions. The Customer agrees not to assert Uniform Commercial Code § 2-207 ("§ 2-207") or any statute based on § 2-207 to avoid, modify or add to these Terms.
Type of Business.    Customer certifies that it qualifies as a business eligible to purchase from Fast-Spec and shall notify Fast-Spec of any changes which might affect its liability for sales and/or use taxes applicable on any future purchase.
Payment.    Terms of all sales are cash or check (payable in U.S. dollars). No payment may be made by credit, debit or charge card. If an invoice or obligation of Customer is not paid by the net due date indicated on Fast-Spec’s invoice to Customer, Fast-Spec shall levy a "service charge" to cover the additional cost of handling the account in an amount equal to one and one-half percent (1.5%) per month or part thereof until paid. Customer acknowledges and agrees that this charge is a "service charge" levied by Fast-Spec to reimburse Fast-Spec for the additional cost of carrying its delinquent account and that such charge is not an interest charge. Fast-Spec reserves the right at any time to revoke or decrease any credit extended to the Customer, require payment security satisfactory to Fast-Spec or cancel any order if Customer's account is delinquent, Customer fails to pay any obligation when due or, in Fast-Spec’s opinion, there is an adverse change in Customer's financial condition. Delays in delivery or nonconformities in any installments delivered shall not relieve Customer of its obligation to accept and pay for remaining installments.
Collection Costs.    If it becomes necessary for Fast-Spec to retain legal or collection agency assistance to collect an overdue account, Customer shall pay all such costs of same, including any necessary and related incidental expenses (collectively, "Collection Costs"). Customer unconditionally waives its right to assert any statute, regulation or judicial decision that places limits on the amount of necessary Collection Costs that Fast-Spec can recover from the Customer to collect the account.
Prices.    Unless otherwise specified in writing by Fast-Spec, all proposals expire thirty (30) days from the date thereof. Prices do not include any federal, state or local property, license, privilege, sales, use, excise, gross receipts, or other like taxes. Such taxes, if any, shall be added to the purchase price and shall be paid by Customer unless Customer provides Fast-Spec with an exemption certificate acceptable to the taxing authorities. Any such taxes which Fast-Spec may be required to pay or collect under any existing or future law shall be for the account of Customer, who shall promptly pay the amount thereof to Fast-Spec upon demand.
Jurisdiction.    If a dispute arises between the parties, regardless of its nature, the parties submit to the exclusive jurisdiction and venue of the state and federal courts located in Jackson, Mississippi or within thirty (30) miles of Jackson, Mississippi. Litigation between the parties in any other venue or forum is prohibited. This provision is mandatory. It is not permissive. All depositions that are part of a litigated dispute between the parties will take place in Hinds County, Mississippi, and all documents and electronically stored information that the parties are entitled to obtain through discovery requests will be produced in Hinds County, Mississippi.
Security Interest.    To secure the payment and performance in full of all of Customer's debts and obligations under and in connection with any Agreement and any order, Customer hereby grants to Fast-Spec a security interest in any unpaid Goods purchased from Fast-Spec, and all proceeds and products thereof. Customer hereby irrevocably authorizes Fast-Spec at any time and from time to time to file in any filing office any initial financing statements and amendments thereto, and to take such other actions as Fast-Spec deems necessary to protect Fast-Spec’s rights in such Goods.
Sales Final.    All purchases are final and no Goods purchased from Fast-Spec shall be returned for credit without prior written approval and acceptance of Fast-Spec. All items returned are subject to restocking charges.
Shipment.    All shipments are F.O.B. point of origin and Customer is responsible for all claims with carriers and shipping insurance costs. Customer shall bear risk of loss upon tender of Goods by Fast-Spec to Customer, Customer's representative or a common carrier. Claims for Goods damaged or lost in transit should be made by Customer to the common carrier as Fast-Spec’s responsibility ceases upon tender of goods to Customer, Customer's representative or a common carrier.
No Waiver.    Fast-Spec’s failure to insist upon the strict performance of any term or condition herein shall not be deemed a waiver of Fast-Spec’s rights or remedies hereunder, nor of its right to insist upon strict performance of the same or any other term herein in the future. No waiver of any term or condition herein shall be valid unless in writing and signed by an authorized representative of Fast-Spec.
Force Majeure.    Fast-Spec’s failure to perform any term or condition of an order or Agreement as a result of conditions beyond its control such as, but not limited to, war, strikes, fires, floods, acts of God, governmental restrictions, power failures, or damage or destruction of any facilities or infrastructure, shall not be deemed a breach of an order or Agreement.
DISCLAIMER OF WARRANTIES.    ALL WARRANTIES ON GOODS ARE SOLELY THE MANUFACTURERS'. FAST-SPEC EXPRESSLY DISCLAIMS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTIBILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. FAST-SPEC’S SOLE RESPONSIBILITY IS LIMITED TO RETURN OF GOODS AND REPAYMENT OF THE PRICE OR TO THE REPAIR AND REPLACEMENT OF NON-CONFORMING GOODS OR PARTS. IN NO EVENT SHALL FAST-SPEC, ITS SUPPLIERS OR SUBCONTRACTORS BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE, LOSS OF USE OF GOODS, COST OF CAPITAL, COST OF SUBSTITUTE GOODS, FACILITIES OR SERVICES, DOWNTIME COSTS, DELAYS, AND CLAIMS OF CUSTOMERS OF THE CUSTOMER OR OTHER THIRD PARTIES FOR ANY DAMAGES. FAST-SPEC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH ANY SALE OF GOODS.
1 -    Either of the following constitutes your ("Seller") acceptance of these T&Cs: (a) Seller's execution or acknowledgement of a purchase or work order ("Order"); or (b) Seller's commencement of performance of the Order (e.g., promising or commencing performance); provided, however, we ("Fast-Spec") may treat the offer made by the Order as having lapsed before acceptance if Seller fails to so accept within a reasonable period of time. Except as provided in Section 3 (only as to an extended warranty period) and Section 10 below, Orders are subject to and governed exclusively by, and Seller's acceptance thereof is expressly limited to, these T&Cs. Fast-Spec hereby expressly rejects and objects to any prior or subsequently proposed term, condition or alteration. No modification or waiver of these T&Cs shall be binding on Fast-Spec unless expressly accepted in writing by Fast-Spec's authorized officer. Any reference to Seller's quote, bid or proposal does not constitute acceptance of any legal terms or condition thereof.
2 -    Orders may be issued electronically or in writing. The purchase price for goods ("Products") and services sold to Fast-Spec shall be as listed on the Order or as otherwise agreed in writing by the parties. Fast-Spec will pay undisputed portions of valid invoices within sixty (60) days of Fast-Spec's receipt. Fast-Spec may cancel or change Orders without penalty upon at least ten (10) days' notice. If Seller believes any such change will affect the price or delivery date, Seller shall so notify Fast-Spec in writing (with reasonable supporting documentation) within three (3) days of receiving said written direction or the change shall be deemed accepted without modification to the price or date of delivery. Any such modification to price and/or delivery date must be pre-approved by Fast-Spec in writing. No substitutions shall be made without Fast-Spec's prior written consent. Products shall be tendered by Seller in a single delivery unless otherwise agreed. Shipments shall be F.O.B. (INCOTERMS 2010) Fast-Spec's designated destination or otherwise in accordance with shipping terms on the Order. No charge will be allowed for packing, shipping or handling unless stated in the Order. Seller shall pay for damaged Products resulting from improper packing or marking. Itemized packing lists must accompany each shipment. Fast-Spec's count will be final and conclusive on shipments not accompanied by Seller's itemized packing list. Time is of the essence. Seller shall promptly notify Fast-Spec of any actual or anticipated delay and shall take all commercially reasonable steps to avoid or end delays without additional cost to Fast-Spec.
3 -    Seller represents, warrants, and covenants that: (i) it has and will transfer good title to Products upon delivery, free and clear of all liens, claims and encumbrances of any kind; (ii) Products will conform to Seller's standard technical specifications and to all specifications, descriptions, drawings and standards provided by Fast-Spec or otherwise agreed to by Seller, and they will be new, meet the highest industry standards, fit for the purpose(s) normally intended (or specifically intended if such intent is communicated to Seller in the Order or otherwise), and Products and services will be free from defects in design, materials and workmanship; (iii) Products and their use, sale, lease and distribution will not infringe, misappropriate, or violate trademarks, service marks, copyrights, patents, patent rights, trade secrets or other intellectual property rights of a third party; (iv) it will utilize all necessary or desirable protective equipment and devices, whether suggested or required by safety associations, government agencies, municipalities or otherwise; (v) that all services shall be done with the utmost skill, care and diligence, in a good and workmanlike manner, in accordance with the terms hereof and good industry standards of performance and in a timely manner; (vi) it and the Products and services provided to Fast-Spec will comply with all applicable laws, codes, standards and regulations (including, but not limited to anti-corruption and anti-bribery, child labor, affirmative action and conflict minerals); and (vii) it will comply with all aspects of Fast-Spec's Cyber Security Requirements outlined in Appendix 1 as applicable. The foregoing warranties are enforceable by Fast-Spec and its direct and indirect customers receiving such Products (together, "Customers"), and each shall remain valid for the longer of: (1) eighteen (18) months from the date of shipment from Seller; (2) such longer period as is offered by Seller in its then standard warranty; or (3) such longer period as is required by applicable law. If Seller breaches any of the foregoing warranties, Seller shall, at Fast-Spec's election and at Seller's sole cost and expense (including, but not limited to, all transport, packaging, removal, testing, re-install and other labor costs): (a) repair or replace Products or services to Fast-Spec's complete satisfaction; (b) reimburse Fast-Spec for the purchase price paid for such Products or services; or (c) reimburse Fast-Spec for the cost of substitute products or services obtained by Fast-Spec from third-parties. Warranties shall begin anew on the date of repair or replacement pursuant to this Section 3.
4 -    Seller shall indemnify, defend and hold harmless Fast-Spec, its parent, subsidiaries, Customers and affiliates, and its/their officers, directors, employees, agents, contractors and representatives, from and against any and all actual or asserted claims, actions, damages, injuries, fines, penalties, settlements, judgments, losses, costs and expenses (including court costs and attorneys' fees) (collectively "Losses") arising out of, in connection with, or resulting directly or indirectly from: (i) Seller's breach of any representation, warranty or covenant hereunder; (ii) the use, sale, lease or distribution of Products (including, without limitation, for Losses that are attributable, in whole or in part, to contamination, pollution or environmental damage (including clean-up costs), data or security breaches, or any inaccurate or misleading representations or omissions from any Product literature, communication, packaging, warning or instruction relating thereto); (iii) recall of Product initiated or required by Seller, a governmental agency or applicable laws, rules, orders or regulations; or (iv) negligence, gross negligence, recklessness, fraud, strict liability, fault, violation of law, or willful misconduct of Seller, its employees, suppliers, manufacturers, contractors, officers, directors, guests, invitees or agents. Seller acknowledges and agrees that its indemnity obligations under this Section 4 shall be enforceable against Seller regardless of whether or not insurance Seller maintains covers such indemnity obligations. The foregoing shall not be construed to negate, abridge, or otherwise reduce any other right or obligation that would otherwise exist as to any party or person described herein. In the event that any indemnity provisions herein are contrary to applicable law, then such indemnity obligations shall be construed to apply to the fullest extent allowed by applicable law.
5 -    TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EITHER PARTY, OR ITS PARENT OR AFFILIATES, OR ANY OF ITS/THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS, BE LIABLE HEREUNDER FOR ANY SPECIAL, RELIANCE, CONSEQUENTIAL, EXEMPLARY, PUNITIVE, INCIDENTAL OR INDIRECT DAMAGES, INCLUDING, WITHOUT LIMIT, FROM DAMAGES TO PROPERTY, FOR LOSS OF PROFITS, INCOME, USE OR TIME, WHETHER IN TORT, CONTRACT, OR OTHERWISE RESULTING FROM PERFORMANCE OR NON-PERFORMANCE HEREUNDER, AND WHETHER OR NOT IT/THEY KNEW OF THE POSSIBILITY THEREOF; PROVIDED, HOWEVER, THIS SECTION 5 SHALL NOT LIMIT SELLER'S OBLIGATIONS UNDER SECTIONS 4 OR 12.
6 -    Unless otherwise expressly agreed in writing by Fast-Spec, Seller shall not, and shall not authorize any other party to, use, modify, reproduce or replicate any trademark, logo or trade name owned or claimed by Fast-Spec ("Fast-Spec Marks") in any way. Seller shall not contest Fast-Spec's right of exclusive use of any Fast-Spec Mark. Upon expiration or termination of the Order, Seller will remove and not thereafter use any sign, catalogue, brochure or other material (whether print or electronic) containing any Fast-Spec Mark and Seller will, at Fast-Spec's option, immediately destroy or return to Fast-Spec such material in its possession or under its control containing Fast-Spec Marks. In addition, Seller agrees not to use any Fast-Spec Marks in any promotional material, including without limitation, customer lists, advertisements, or press releases, without Fast-Spec's advance written authorization.
7 -    The occurrence of any one or more of the following shall constitute an "Event of Default": (i) delivery of services or Products failing to conform to any provision hereof ("Non-Conforming Products"); (ii) Seller's breach or failure to perform its obligations hereunder; or (iii) Seller's breach or misrepresentation of any representation or warranty herein. Upon an Event of Default, Fast-Spec shall be entitled, but not required, to exercise any or all of the following: (i) for late delivery or performance, Fast-Spec may extend the time therefore and/or require expedited shipping/services, and such Products/services shall be provided in the manner and per the timelines specified by Fast-Spec, at Seller's sole cost; (ii) with respect to Non-Conforming Products, Fast-Spec shall have all of the rights and remedies available under Sections 3 and 4 above; (iii) reject or revoke acceptance, as the case may be, of all or any portion of the shipment of Products containing any Non-Conforming Products; and/or (iv) exercise any other rights and remedies specified in the Order or otherwise available under applicable law. Fast-Spec may exercise any one or more of the foregoing rights and remedies by notifying Seller of such intent. Fast-Spec shall not be liable to Seller on account of exercising any such rights or remedies. Seller acknowledges and agrees that the occurrence of an Event of Default constitutes a substantial impairment of value to Fast-Spec of the shipment at issue, the entire Order, and any other then pending Orders, so as to entitle Fast-Spec to exercise any and/or all of the remedies specified herein, in the Order, and at law, and Seller hereby waives its right to cure the default in question, unless otherwise agreed in writing by Fast-Spec. The making of or failure to make any inspection of or payment for the Products shall in no way impair Fast-Spec's right to reject Non-Conforming Products, nor be deemed acceptance by Fast-Spec of the Products, nor affect in any way Seller's obligations hereunder, notwithstanding Fast-Spec's opportunity to inspect the Products, Fast-Spec's knowledge of the non-conformity or defect, its substantiality or the ease of its discovery, nor Fast-Spec's earlier failure to reject the Products.
8 -    All questions pertaining to the validity, construction, execution and performance of the Order and the relationship of the parties hereto shall be construed and governed by the laws of Delaware and the USA, without giving effect to the principles of (i) comity of nations; or (ii) conflicts or choice of law provisions thereof, and the Order shall not be governed by the U.N. Convention on Contracts for the International Sale of Goods. Exclusive jurisdiction shall be in the appropriate state or federal court in the state of Fast-Spec's principal place of business.
9 -    Seller certifies that it has an affirmative action policy ensuring equal employment opportunity without regard to, and that it maintains no employee facilities segregated on the basis of, race, color, national origin, sex, age, sexual orientation, religion or handicap, and that it is not debarred or suspended from being awarded Federal or Federally assisted contracts. If applicable, the following laws, orders and regulations, as amended, are hereby incorporated: Executive Order 11246; Vietnam Era Veterans Readjustment Act; Rehabilitation Act of 1973; Veterans Compensation, Education and Employment Act; 41 CFR 60-1.4 (Equal Employment Opportunity); 41 CFR 60-250.4 ?(Veterans Affirmative Action); 41 CFR 60-741.4 (Handicap Affirmative Action); 41 CFR 601.40 (Affirmative Action Plans); 41 CFR 601.7 (EE01 Reports); 41 CFR 61650 (Veterans Employment Reports). Seller certifies and warrants that it is and shall remain in compliance with all applicable anti-corruption and anti-bribery laws and that the Products are produced in compliance with the Fair Labor Standards Act of 1938, as amended, and the regulations and orders of the U.S. Department of Labor issued thereunder, and that each invoice it submits is correct and authentic and the only one issued for the Products at issue, and that all Products comply with the Occupational Safety and Health Act of 1970, as amended, and the applicable state plans approved under same, and the regulations thereunder, to the extent applicable. Seller shall notify Fast-Spec in writing if Products are subject to laws or regulations relating to hazardous or toxic substances, or when disposed of, to regulations governing hazardous wastes, or to any other health, safety and/or environmental regulations. Seller shall furnish all appropriate shipping certifications, labeling in compliance with the Workplace Hazardous Materials Information System, Material Safety Data Sheets in compliance with the Workplace Hazardous Materials Information System, and instructions for shipping, safety, handling, exposure and disposal in a form sufficiently clear for use and actions to be taken by Fast-Spec's and its Customer's non-technical personnel.
10 -    Without limiting Seller's obligations or liabilities hereunder, Seller shall, on the date an Order is accepted and for a period of two (2) years thereafter, at its sole expense, purchase and maintain the following insurance coverage with carriers that have A.M. Best ratings of not less than A- and with a minimum financial rating of Class VII: (a) Commercial General Liability Insurance that covers all liabilities for bodily injury and property damages arising from the Products, services and/or the performance of an Order, with limits of liability of at least $5,000,000 for each occurrence and in the aggregate. Coverage must include Products/Completed Operations, Personal and Advertising Injury and Blanket Contractual Liability (CG 20 10 or its equivalent must be provided). Such CGL insurance may be maintained through any applicable combination of CGL and Excess/Umbrella Coverage; (b) Automobile Liability Insurance that covers all liabilities for bodily injury and property damages arising from the use of all owned, hired or non-owned vehicles, with limits of liability of at least $1,000,000 for each occurrence and in the aggregate; (c) Workers Compensation Insurance shall be statutory by state law and Employer's Liability Insurance with limits of liability of at least $1,000,000; (d) Product Liability Insurance that covers the Products with limits of liability of at least $5,000,000 in the aggregate; and (e) Technology Errors & Omissions Liability Insurance, with a minimum limit of $5,000,000 per claim and in the aggregate, covering all Products including failure of information technology security, data privacy breach and software copyright infringement (if coverage is on a claims-made basis, the policy must contain a retro date which precedes the effective date of the Order and continuity must be maintained for 1 (one) year following termination or expiration of the Order). All insurance coverage required herein for Seller shall extend to and protect Fast-Spec and its subsidiaries, parent company and/or affiliates to the full amount of such coverage, and all deductibles and/or self-insured retentions (if any), including those related to defense cost, are the sole responsibility of Seller and, upon Fast-Spec's request, Seller shall disclose the same to Fast-Spec. All policies, except the Workers' Compensation insurance, shall be endorsed to name Fast-Spec, its parent and affiliated entities, and its/their directors, officers, employees, representatives, and agents, as an additional insured and such policies shall be endorsed to waive all express or implied rights of subrogation against Fast-Spec, its parent and affiliated entities. The insurance coverage set forth above shall be primary to any liability insurance or other insurance carried by Fast-Spec, its affiliates or parent and Fast-Spec's, its affiliate's and parent's other insurance shall be excess and non-contributory for claims and losses arising out of the performance of an Order. Seller shall provide a coverage endorsement for each category of insurance required above, except for Workers' Compensation, which includes a cross liability clause, stating that the Seller and Fast-Spec shall each be considered as a separate entity. The policies shall not be canceled, terminated or materially reduced without thirty (30) days' advance written notice to Fast-Spec. Seller shall provide Fast-Spec with a Certificate of Insurance evidencing the above-required types and amounts of insurance coverage and other requirements prior to selling Products and providing services to Fast-Spec and on an annual basis thereafter. Failure of the Seller to provide Fast-Spec the Certificate of Insurance or failure of Fast-Spec to specifically request such certificate, shall in no way limit or release the Seller of its obligations or liabilities under this Section 10. In the event the Seller or its insurance carrier defaults on any obligation hereunder, Seller agrees that it will be liable for all reasonable expenses and attorneys' fees incurred by Fast-Spec or its affiliates to enforce the provisions hereunder.
11 -    Unless Fast-Spec and Seller are currently entered into a separate, written agreement that specifically governs their business relationship and the subject matter of the Order, and unless that written agreement specifically contains a merger clause that addresses conflicting terms and conditions in purchase orders, invoices, etc., then these T&Cs constitute the entire agreement and understanding between the parties, and supersede and replace all prior negotiations and agreements, proposed or otherwise, whether written or oral, concerning the subject matter hereof. No course of dealing, usage of trade or course of performance shall be relevant to explain, supplement or modify any express provision of these T&Cs.
12 -    Fast-Spec may disclose Confidential Information (as defined below) to Seller in connection with its purchase of Products and services from Seller. Seller shall not disclose any Confidential Information or any portion thereof to any person or entity and shall only use such Confidential Information to fulfill its obligations hereunder, it being understood that such Confidential Information provides Fast-Spec with a competitive advantage in its trade because it is not generally known or available to the public. In that regard, Seller acknowledges and agrees that Fast-Spec has taken and is taking reasonable steps to protect the confidentiality of, and its legitimate interests in, the Confidential Information. The term "Confidential Information" means information concerning Fast-Spec's business, personnel, data, financial and marketing plans, intellectual property rights (including, without limitation, patents, trademarks, copyrights and trade secrets), forecasts, strategies and statements, and Customer related information. To the extent allowed by law, Seller shall notify Fast-Spec in writing in advance of any disclosure of Confidential Information required by law, court or administrative order.
13 -    All notices permitted, required or provided for herein shall be made in writing, and shall be deemed adequately delivered if delivered by hand, certified mailing in the U.S. mail with return receipt requested, or by a recognized courier service that regularly maintains records of its pick-ups and deliveries, to the parties at their respective addresses, as set forth on the face of the Order or as otherwise designated by a party hereto. Any waiver of any of the provisions herein or of any inaccuracy in or non-fulfillment of any of the representations, warranties or obligations hereunder or contemplated hereby, shall not be effective unless made in writing and signed by the party against whom the enforcement of such waiver is sought. Any provision of these T&Cs that is deemed invalid or unenforceable in any jurisdiction shall, as to such jurisdiction only, be ineffective only to the extent of such invalidity or unenforceability, without rendering invalid or unenforceable or otherwise affecting the remaining terms and provisions hereof. Neither party may assign or otherwise delegate any of its rights or obligations hereunder without the prior written consent of the other party, which consent will not be unreasonably withheld, delayed or conditioned; provided, however, Fast-Spec shall have the right to assign Orders without Seller's consent to an affiliate of Fast-Spec. The provisions hereof that by their nature are intended to survive the termination, cancellation, completion or expiration of the Order shall continue as valid and enforceable obligations of the parties notwithstanding any such termination, cancellation, completion or expiration. To the maximum extent permitted by applicable law: (i) Seller's warranties are fully-enforceable by Fast-Spec and its Customers (as intended third-party beneficiaries); and (ii) the indemnities provided hereunder are fully-enforceable by Fast-Spec and/or any or all of the other indemnitees identified above in Section 4.
14 -    Fast-Spec/Summit monitors external providers performance. Unless otherwise agreed upon, 95% acceptance of products/service is expected. Failure to meet this requirement may affect your approval status for products/services.
15 -    If providing calibration service, calibrations shall be performed with standards that have calibration traceable to N.I.S.T standards.
16 -    Supplier is to ensure that all products as part of a purchase agreement are free of hazardous materials. Suppliers bears the responsibility to insure only RoHS Compliant items are used for the performance of this order as required.
1 -   Seller shall ensure all Products have been developed in accordance with principles of secure software development consistent with software development industry best practices, including, but not limited to, security design review, secure coding practices, risk based testing and remediation requirements. Seller must use reasonable measures to secure the software development environment of the Products from unauthorized access.
2 -    Seller shall include cyber security guidance in the Product documentation provided to Fast-Spec. This documentation shall include guidance on how to configure the Products and/or the surrounding environment to best ensure security. It shall also include guidance on which logical or physical ports are required for the Product to function. If authentication is used to protect access to any service or capability of the Products, regardless of the intended user of that service/capability, the Seller shall ensure:
2.1     the Products shall not provide access to that service or capability using a default account/password;
2.2    the Products shall not provide access to that service or capability using a "Backdoor" account or password;
2.3    the Products’ associated authentication and password change processes shall be implemented with an appropriately secure cryptographic level; and
2.4    Fast-Spec shall be able to change any passwords supported by the Products.
3 -   In the event that any wireless technology is incorporated in any Product, Seller shall document that the wireless technology complies with standard operational and security requirements specified in applicable wireless standard(s) or specification(s) (e.g., applicable IEEE standards, such as 802.11).
4 -    In the event that any cryptographic systems are contained in the Product, Seller shall only use cryptographic methods that are "Approved" as defined in the Federal Information Processing Standard (FIPS) Security Requirements for Cryptographic Modules (FIPS 140-2), and Seller shall provide an automated remote key-establishment (update) method that protects the confidentiality and integrity of the cryptographic keys.
5 -    Seller must develop and maintain an up-to-date Cyber Security Susceptibility management plan designed to promptly identify, prevent, investigate, and mitigate any Cyber Security Susceptibilities and perform any required recovery actions to remedy the impact. "Cyber Security Susceptibility(ies)" is defined as any bug, software defect, design flaw, or other issue with software associated with a Product that could adversely impact the confidentiality, integrity or availability of information or processes associated with the Product.
6 -    Seller shall notify Fast-Spec within a reasonable period, in no event to exceed five (5) business days after discovery, or shorter if required by applicable law or regulation, of any potential Cyber Security Susceptibility. Seller shall report any Cyber Security Susceptibility to Fast-Spec. Within a reasonable time thereafter, Seller shall provide Fast-Spec, free of charge, with any upgrades, updates, releases, maintenance releases and error or bug fixes necessary to remediate any Cyber Security Susceptibility. Seller shall reasonably cooperate with Fast-Spec in its investigation of a Cyber Security Susceptibility, whether discovered by Seller, Fast-Spec, or a third party, which shall include providing Fast-Spec a detailed description of the Cyber Security Susceptibility, the remediation plan, and any other information Fast-Spec reasonably may request concerning the Cyber Security Susceptibility, as soon as such information can be collected or otherwise becomes available. Fast-Spec or Fast-Spec's agent shall have the right to conduct a cyber security assessment of the applicable Products, and the Product development lifecycle, which includes tests intended to identify potential Cyber Security Susceptibilities. Seller shall designate an individual responsible for management of the Cyber Security Susceptibility, and shall identify such individual to Fast-Spec promptly.
7 -    Seller represents, warrants and covenants that all open source software contained within the Products are and shall be in material compliance with the terms and conditions of the applicable licenses governing their use, and the Products or the use thereof by Fast-Spec shall not cause Fast-Spec or Fast-Spec's intellectual property rights to be subject to the terms or conditions of a copyleft license, or require Fast-Spec to fulfill any open source license obligations for any open source software contained within the Products.
8 -    Seller represents, warrants, and covenants that the Products shall be free of viruses, malware, and other harmful code (including, without limitation, time-out features) which may interfere with the use of the Products regardless of whether Seller or its personnel purposefully placed such code in the Products. In addition to exercising any of Fast-Spec's other rights and remedies under the Order or otherwise at law or in equity, Seller shall provide Fast-Spec, free of charge, with any and all new versions, upgrades, updates, releases, maintenance releases, and error or bug fixes of the Products (collectively, "Revised Code") which prevents a breach of any of the warranties provided under the Order or corrects a breach of such warranties. Revised Code contained in the Products constitutes Products for purposes of the Order.